Aesthetix Callisto - Manual (Page 3)

C. Connect male end of the other supplied umbilical cable to the remaining
power output jack on the power supply.
D. Connect female end of the same umbilical cable to the remaining male
receptacle on the main unit.
E. Connect sources to Callisto using either RCA or XLR connectors.
F. Connect Callisto to the power amplifier using either RCA or XLR
connectors.
G. Ensure that the power amplifier is turned off.
H. Connect power cord of the power supply to an unswitched wall outlet or
line conditioner.
OPERATION
*Ensure linestage/preamp and/or power amp are properly muted to prevent
possible damage to speakers.
A. Turn power on.
B. Wait at least ten minutes for power supplies to fully stabilize before
turning on power amplifier.
C. Play music from a source.
D. Slowly increase volume level until desired loudness is attained.
F. Before turning Callisto off, ensure that the power amplifier is properly
muted/turned off.
G. Turn off Callisto.
Unity gain on current production units is 38. Due to slight variations in tube
gain, in some units unity gain may be at 37 or 39.
3