Sample configuration, Figure 4.1, Observing the correct polarity for volt – AMETEK XHR 1000 Watt Series User Manual
Page 70
Advertising
Remote Operation
Remote Analog Programming of Output Voltage and Current Limit
70
Operating Manual for XHR Series Power Supply
Figure 4.1 Connecting Programming Sources to J2 Connector
Sample
Configuration
The sample configuration in
shows the required settings and connections
for:
•
0-10 Vdc programming of the output voltage
•
local control (front panel control) of the output current limit
Figure 4.2 Sample Analog Programming Configuration
SW1-3: ON (CLOSED)
J2 Jumper: 3 to 4
Advertising