0 microq_lite_controller software, 1 getting started, 2 running the microq_lite_controller – Apantac MicroQ User Manual
Page 11: 3 connecting to the microq
MicroQ
APANTAC LLC, 7556 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
10
5.0 MicroQ_Lite_Controller Software
5.1 Getting Started
The MicroQ_Lite_Controller is design to allow you to quickly access all the feature sets of the
MicroQ on a single User Interface. This section will help you get the MicroQ up and running
with the MicroQ_Lite_Controller as quickly as possible.
5.2 Running the MicroQ_Lite_Controller
Before you can successfully run the MicroQ_Lite_Controller, you must first copy it from the
CD prvided and place it in an appropriate location on your computer’s HDD.
Now you can run the MicroQ_Lite_Controller by double clicking on the “Apantac
MicroQ_Lite_Controller” icon.
Figure 5.1: Double click on the Apantac MicroQ_Lite_Controller
5.3 Connecting to the MicroQ
To connect to the MicroQ you PC must be connected to the same subnet as the MicroQ.
The default IP address for the MicroQ is 192.168.1.151
After the MicroQ_Lite_Controller launches, you will see this screen