April Music Eximus CD10 - Manual (Page 5)

CD Player
Fig. 2] The Front Panel Fig. 3] The Display Window
STANDBY
Turn on 'Mains' power switch located on the rear panel. Red LED above the 'STANDBY' switch will begin to glow. Turn on the unit by pressing the
'STANDBY' button once. The LED will change to green and the T10 is now ready for use.
UPSAMPLE
The factory setting for the UPSAMPLE rate is 192 kHz. A red LED indicates
the selected rate.
You may select during play your favorite sampling rate by pressing the UPSAMPLE button.
The selection will alternate between 192 kHz, 96 kHz and Bypass. A small click sound during selection is normal.
OPEN / CLOSE
Use this button to open or close the disc tray. Place the CD with printed label side up.
PLAY
Press 'PLAY' to play the disc.
The track number and relapsed time will be displayed on the right side.
CONNECTION
Page4
STOP PLAY DISC REPEAT PAUSE TRACK