April Music Stello DA220 - Manual (Page 6)

The Stello DA220
5
Digital Input
For digital input, maximum 4 of inputs are available. Please refer to the table below.
SOURCE CONNECTION TYPE RECOMMENDED INPUT RATE REPRODUCE UPSAMPLING RATE
CD Transport Digital XLR, Coaxial or Toslink Upto 96kHz Upto 192kHz
DVD Transport Digital XLR, Coaxial or Toslink Upto 96kHz Upto 192kHz
HDTV Receiver Coaxial or Toslink Upto 96kHz Upto 192kHz
Satellite Coaxial or Toslink Upto 96kHz Upto 192kHz
LD Player Coaxial or Toslink Upto 96kHz Upto 192kHz
When listening to music using a CD transport, balanced digital cable is recommended for the
maximum quality of sound reproduction.
If there isn’t any balanced digital terminal on the transport, connection should be made with coaxial
terminal 1 or 2.
For a connection with DVD player for a quality 2 channel sound reproduction, digital cable should
be connected between the output of DVD player and DA220. DVD transport has coaxial and/or
optical (Toslink) output terminal. You should change the setting of output into ‘PCM’ from the DVD
setup menu. If you fail to set up properly, you can hear a hissing sound which indicates the output
from DVD is not set to PCM mode.
In case of HDTV or Satellite settop box, use a RCA type coaxial cable or optical Toslink cable
between the settop and DA220.
Digital Output
Digital output terminal is used for the transmission of digital signals for the digital recorders.
DA220 has 3 digital outputs including AES/EBU Balanced digital output, coaxial digital output
and Toslink optical output.