Argox AS-8150 - Manual (Page 92)

91
Exit
5) Repeat the same procedure in Insert G2 characters
setting.
6) Scan Exit barcode.
6) Insert data group 1-4 position. Please refer to Chapter-
Transmission, page 65 and to the specific barcode that
you want to use.
7) Insert data group 1-4 position: The scanner offers 4
positions to insert among the symbols. The position
default value is
“00” to indicate no character insertion.
In addition, make sure insertion positions are not
greater than the symbols; otherwise the insertion data
is not effective.
Option Bar Code Option Alphanumeric
Entry
Insert G1 characters
setting
None
1-12haracters
00
＊
00-ffH ASCII
code
Insert G2 characters
setting
None
1-12 characters
00
＊
00-ffH ASCII
code
Program