ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 51)

Section 2: Web GUI Screens and Configuration Parameter Reference
November 2013 Page 51 of 96
7.2 LAN SETUP – LAN Settings (IPV6)
This screen configures LAN side support for IPV6. You can make changes to the Local Area
Network (LAN) configuration here. For changes to take effect, you must click the Apply button.
LAN Segment: (Technician Level Only)
LAN – Selects the LAN index or identifier for each individual LAN on your network.
Note: You can optionally set up the system so that there is more than one LAN in your
network. This is most useful for commercial applications not home use. All of the “LAN
Setup” and “Wireless Setup” configuration parameters can be set independently for each
individual LAN.