ART Pro Audio HQ15 - Pro Dual 15 Band EQ w/ FDC - Manual (Page 13)

13
SPECIFICATIONS
EQUALIZER
Bands
1*31, 1/3 Octave ISO Spacing From 20Hz to 20kHz. (HQ-31)
2*15, 2/3 Octave ISO Spacing From 25Hz to 16kHz. (HQ-15)
Type Constant Q
Accuracy 3% Center Frequency
Travel 45mm (Positive Center Detent).
Range +/- 6dB or +/- 12dB (Selectable)
INPUTS
Type Active Balanced/Unbalanced
Connectors 3-Pin, 1/4” TRS (Balanced), RCA (Unbalanced)
Impedance 20k. Ohms Balanced; 15K Ohms Unbalanced
Maximum Level +22dBm (Level Control at Center)
OUTPUTS
Type Active Balanced/Unbalanced
Connectors 3-Pin, 1/4” TRS (Balanced), RCA (Unbalanced)
Impedance Typical <150 Ohms
Maximum Level +22dBm (2k Ohms)
+18dBm (600 Ohms)
OVERALL GAIN RANGE
Off to +6dB (Unbalanced out)
Sliders Centered
Off to +12dB (Balanced out)
Sliders Centered
RFI filters Yes
Passive Bypass Switches Yes
Overload LED Threshold
5 dB (Below Clipping)
High Pass Filter 10-250Hz, 12dB/Oct
Low Pass Filter 3k-40kHz, 12dB/Oct
Frequency Response
20-20kHz, +0.5dB
THD + Noise .01% (20Hz-40kHz+10dBu)
IM Distortion (SMPTE) 0.005%
Signal to Noise Ratio -94dB(20kHz Noise Bandwidth)
Channel Separation >50dB
Common Mode Rejection 50:1
LINE VOLTAGE
95-130VAC, 50/60Hz
190-250VAC, 50Hz
INPUT AC POWER
20W
CONSTRUCTION
All Steel
SIZE 3.5” H *19” W *8.5” D (2U)
(8.9cm * 48.3cm * 21.6cm)
WEIGHT 9Ibs(4.1kg).