Artel DLC205 - Manual

www.artel.com | 978-263-5775 | [email protected] | [email protected]
QUICK START GUIDE
DLC205 Front Panel LEDs
LED Function Color Description
OK
DLC205
Module
Status
OFF No power or fault
n Green No alarm, normal operation
n Yellow Minor alarm
n Red Major alarm
P1, P2,
P3
Status of Each
RJ-45 Port
OFF Port disabled
n Green Link established
 Green Link established with data activity
 Red Loss link alarm, if enabled
SFP 1,
SFP 2
Status of Each
SFP Port
OFF No SFP installed or SFP disabled
n Green Link established, no activity
 Green Link established with data activity
 Yellow RX optical power high
n Red TX/RX fault, or RX low optical power
 Red Loss link alarm, if enabled
 Flashing green |  Flashing yellow |  Flashing red
AR208-008105-10_A
Gig-E Aggregator and Optical Transceiver
[DLC205]
DLC205 Rear Panel LEDs
LED Function Color Description
P1, P2, P3
Link
Port Status
OFF Port disabled
n Green Link established
P1, P2, P3
Activity
Port Activity
OFF Port disabled
n Green Activity on link
SFP1,
SFP2 TX
SFP Laser
Status
OFF No SFP installed, or SFP disabled
n Green Normal operation
n Red SFP TX fault
SFP1,
SFP2 RX
SFP Link
Status
OFF SFP disabled
n Green Link established
 Green Data activity
n Yellow RX optical power high
 Red SFP RX fault, low light or LOS
n Red Loss link alarm, if enabled
 Flashing green |  Flashing yellow |  Flashing red
20
Note: Refer to the DLC205/DLM205 Function
Module Installation and Operations Manual for
additional configuration and default settings.