Artel DLC610 - Manual

QUICK START GUIDE
www.artel.com | 978-263-5775 | [email protected] | [email protected]
DLC610 Front Panel LEDs
LED Function Color Description
OK
Module
Status
OFF
No power or if power is applied to the system,
an internal fault with the DLC610 may exist.
n Green Normal operation.
n Yellow Minor alarm.
n Red Major alarm.
ENC
Encode
Mode Indicator
OFF Not in encode mode.
n Green Encode Mode: Valid HD-SDI detected.
n Yellow Encode Mode: No signal detected.
n Red Encode Mode: Invalid input detected.
DEC
Decode Mode
Indicator
OFF Not in decode mode.
n Green Decode Mode: Valid decodable signal detected.
n Yellow Decode Mode: No signal detected.
n Red Decode Mode: Invalid input detected.
VID Video Monitor
OFF Not in video monitor mode.
n Green
Monitor port is a copy of the uncompressed
video signal.
ASI ASI Monitor
OFF Not in ASI monitor mode.
n Green Monitor port is a copy of the compressed ASI.
HD-SDI JPEG 2000 Compression with
DVB-ASI Encapsulation [DLC610]
• Select Pushbutton - Changes the source of the monitor signal. Pressing the button
alternates between the uncompressed video and the compressed ASI signal.
• Mon HD-BNC - A copy of the uncompressed video signal is available when the VID
LED is green. A copy of the compressed ASI is available when the ASI LED is green.
• RST Pushbutton - Pressing and holding this button for more than 4 seconds resets
the DLC610. No user selected parameters are erased.
DLC610 Front Panel: