3 phy, 1 management interface, 4 private i2c bus – Artesyn ARTM-9405 16x10GbE Installation and Use Guide (May 2014) User Manual
Page 46: Table 4-9, Private i2c port, Private i2c bus, Functional description
Functional Description
ARTM-9405 16x10GbE Installation and Use (6806800P45F)
46
4.3
PHY
The ARTM-9405 uses four NetLogic NLP10142 to provide 2x QSFP interfaces and 8x SFP+
interfaces on the face plate.
4.3.1
Management Interface
The Netlogic NLP10142 supports IEEE802.3 Clause 45 station management interface. The
MDC/MDIO signals are connected to Marvell switch device of the ATCA-9405 front board.
4.4
Private I2C Bus
Two private I2C bus on the ARTM-9405 16x10GbE are implemented as a bit banging interface
at the MMC.
Number of power draw
levels
1
The amount of possible power levels
Early Power Draw Levels,
Watt
-
Complete early power level including MMC
Steady state Power Draw
Levels, Watt
?
Complete steady power consumption including IPMC
and RTM
Transition from early to
steady levels, sec
0s
-
Table 4-8 Power Configuration (continued)
Item
Value
Description
Table 4-9 Private I2C Port
MMC Port
Private I2C Signal
PG.4
RTM_PVT_I2C_0_SCL
PG.2
RTM_PVT_I2C_0_SDA
PA.7
RTM_PVT_I2C_1_SCL
PA.1
RTM_PVT_I2C_1_SDA