ATI Audio MX100 User Manual
Page 14
Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www.
audio.com
FIELD ACCESSORIES:
PROK-1
Unit protection kit, which consists of a set of side plates
with, attached side brackets. The side plates protect
the
front panel controls and the rear XLR connectors from
impact damage and provide attachment points
for a
shoulder strap (not included); the slide brackets allow easy
quick change of remote power packs.
ABAG-1
Wraparound carry case with strap (PROK-1 above is
included), houses the MX series of mixers with slide
mounted PPA, DCA or BBU power modules. Space for
auxiliary NP-1 type batteries.
REMOTE POWER PACKS: - For use with Field Accessories
PPA-1
Integrated power pack assembly for remote operation,
which mounts to a mixer. Includes housing with
rechargeable 24VDC gel-cell battery pack (four to six hours
operation), and an external battery charger operating
at 115VAC/60 Hz.
PPA-2
Same as above except battery charger operating at
230VAC/50 Hz. Euro-plug. Contact factory for other plug
configurations.
PPA-B
Extra 24VDC rechargeable gel-cell battery pack, charger
not included.
DCA100-1
Integrated DC/DC converter, which mounts to the mixer and
accepts external battery power with DC inputs from 6 to 18
volts to produce 24VDC mixer power. Four pin XLR battery
connector.
BBU100-1
Battery Pack houses four 9V alkaline or lithium batteries
(not included) for remote operation or back-up power.