ATI Audio UADC-1 User Manual

Page 3

Advertising
background image

Audio Technologies Inc. 856-719-9900 [email protected] www.

audio.com


REMOTE CONTROL INPUT CONFIGURATION:


Audio input switching can be actuated either via external contact closure or by external positive voltage from 5
to 24VDC. Refer to the following table for wiring instructions:



CONNECTOR & FUNCTION

DESCRIPTION & COMMENTS

Connector A
Dry, for use with external switch or relay

AES input is selected with pins A1 and A3 open. To
select analog inputs short pins A1 and A3. Pin A2 is
unused.

Connector B
Wet, for use with +5 to +24VDC input

AES input is selected when no voltage is present on pin
B1. To select analog inputs, supply a positive DC voltage
between 5 and 24 volts to pin B1. Pin B3 should be
connected to remote ground. Pin B2 is unused.

FRONT PANEL CONTROLS AND INDICATORS:


Power

Confirms the presence of 24VDC from the external power supply

Analog Input Present

Left and Right Present LEDs begin to illuminate at an input level of -28dBm.
LEDs are fully illuminated when level reaches -24dBm.

Analog Input Clipping

Left and Right Clipping LEDs begin to illuminate with +18dBm input. LEDs
are fully illuminated at +20dBm.

Analog Input Gain

With a nominal +4dBm analog input, adjust these controls to set the desired
AES output level when the Analog Input is selected via remote control

Remote Active

Indicates that the remote control input on the rear panel has selected the
Analog Input. Analog Input LED will also be illuminated.

Digital Input

Indicates that the remote control input on the rear panel has selected the
Digital Input



SPECIFICATIONS:

Analog Input Level

-10dBu to +24dBu

+4dBu analog input provides –20dBfs AES output

Analog Input Impedance

10kΩ balanced

Frequency Response

10 – 20kHz, +/-0.5dB

Distortion

< .02% THD / IMD

Noise

< -90dB EIN

AES Output Impedance

110Ω, balanced from analog / A-D input. Passive when AES input is active.

Power Requirements

24VDC, 600mA, wall transformer, supplied

Size and Weight

1/2 rack space; 5.0 lbs. shipping weight

Options

21075-501 Rack Mounting Shelf; 21098-501 1/2 RU Blank Panel, WA100-2
220 VAC 50-60Hz CE-approved External Power Supply

Advertising