Avalon Firestyles 864 HO NB Diamond-Fyre Burner - Manual

864 HO NB Diamond-Fyre Burner
Installation Instructions
(sku: 96900142)
Page 1 of 13 17601700 — 2/27/14 © Travis Industries, Inc.
Compatibility
864 HO NB
Additional Items Required
 864 HO NB Diamond-Fyre Firebacks
(96100832 Stainless, 96100833 Black Enamel, or 96100834 Black Painted)
 Driftwood Log Set “B” (94500572) or Fyre-Stone Set “C” (94700764)
 Crushed Glass (94500580 Platinum, 94500581 Bronze, or 94500582 Cobalt)
Installation Warnings
Make sure electricity to the fireplace is shut off prior to servicing. Disable the circuit
breaker or disconnect the electrical hookup before proceeding.
Make sure the gas control valve is OFF and the heater is cool before servicing.
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
The burner must be correctly positioned before installing the media. Make sure the burner
is fully seated and the pilot is properly aligned.
Packing List
NOTE: The media tray is shipped attached to the burner.
Light Tray
(4) #8 3/8” Screws
Burner and media tray
Log Support
(Driftwood only)
Pilot Air Shield
Front Burner Skirt
Air Deflector
Cover Plate
Burner Brackets
(Driftwood only)