Avalon Firestyles 1750 Panel Set - Manual

Panel Set, Revere, 1750
(see part #’s below)
© Travis Industries 17601279 - Page 1 of 2 8/11/09
CHECK CONDITION OF SHIPMENT
Upon receipt of this kit, check the condition of the packaging. Damage to the package should be noted on
the carrier's freight receipt. Any damage claims as a result of shipping must be handled through the shipper.
Travis Industries will provide assistance in resolving shipping claims or replacing items not included in the
package. Please report any missing items immediately.
COMPATIBILITY
• Revere • 1750 Insert
ITEMS NEEDED FOR ASSEMBLY
• 5/16” and 3/8" Nutdriver • Small & Large Standard Screwdriver
PACKING LIST
• Top Panel • Two Side Panels (7) Spring Clips • Trim (& hardware)
PANEL SIZING and PART NUMBERS
S i z e H e i g h t Width Black Trim #
8" 27 5/8" 40 3/8 " 99300289
10" 29 5/8" 44 3/8 " 99300290
12" 31 5/8" 48 3/8 " 99300291
INSTALLATION INSTRUCTIONS
1. With the insert 12” from the fireplace, install the side surround panels (see the directions below).
1750
Attach the side panels using the nuts and bolts
included with the stove.
REVERE
Attach the side panels using the studs on the side convection fronts and the nuts included with the stove.
Side Convection Front
(Revere Only)
NOTE: These flanges on the
side panels insert into the
convection channel.