Avalon Firestyles Wood Insert Adjustable Offset Adapter - Manual

Wood Insert Adjustable Offset Adapter
SKU 96200355
Page 1 of 2 17601841 — 3/26/14 © Travis Industries, Inc.
Compatibility
• Small Flush Wood Insert
• Flush Wood Plus Insert
• Large Flush Wood Insert • Lopi Revere and 1750i
• Lopi
Freedom
• Lopi Freedom Bay
Packing List
• Offset Adapter
• (8) Self-Drilling Screws
Dimensions
The offset adapter is
adjustable to allow
for a customized fit
into the fireplace.
Warning Regarding Draft
Use of an offset adapter may degrade draft performance of the insert. To minimize the
adverse effects, set the adapter to the minimum offset possible.
Installation
1. Calculate the required offset for the adapter (between 4” and 7”). This is done by
measuring the difference between the insert’s flue outlet within the fireplace cavity
and the chimney liner position inside the fireplace.
2. Using gloves, slide the two-part adapter to the correct offset (grasp the inside of the
flue collars to separate).
3. Use the 6 included self-drilling screws to secure the top of the adapter to the bottom
of the adapter (see photo below). 3 holes are provided on the top and bottom for
this purpose.
4" to 7"
2"
1.5"
1.5"
1"
2.5"
6" Dia. Outlet
6" Dia. Inlet