Avalon Firestyles Flush Wood Plus Cypress Face - Manual

Flush Wood Plus Cypress Face Installation
(95600565)
Page 1 of 7 17601651 - Printed 11/15/13 © Travis Industries, Inc.
Installation Notes
Before installing, make sure to install the one-piece panel, and disconnect the power cords making sure the Molex
connector and two wires are routed in front of the insert.
Figure 1: Molex connector
Figure 2: Two wires
This face and panel set extends the insert 19” into the fireplace (this is 1-1/4” more than the Flush Wood Arched).
Compatibility
• Flush Wood Plus Insert Rectangle with 1-Piece Panel
Packing List
• Upper Face, Lower Face, Left & Right Face
• Extension Rods (2)
• (5)
Lock-Ties
• (4)
Nuts
• Bypass Rod Pull-Ring
Sizing
Height Width
23.5” 38”
NOTE: The 1-piece panel is required for installation (the face
mounts to the panel).