Avery Dennison Pathfinder 6032 Supply User Manual
Read this first, Loading for peel mode loading for non-peel mode
Loading for Peel Mode
Loading for Non-Peel Mode
3. Open the spring-loaded supply holder and place the
supply roll in the supply holder so that the supply
feeds from the bottom.
2. Open the spring-loaded supply holder and place the
supply roll in the supply holder so that the supply
feeds from the bottom.
4. Hold the printer upright and gently press down on
the label deflector. (It may be stiff.)
5. Feed all four inches of the backing paper
the
applicator roller,
the peel bar
and
the label deflector.
under
over
under
6. Push the label deflector up until it snaps
into place.
7. Partially close the cover to the first
position.
8. Pull the backing paper
the guide
rollers, down to the pinch and feed rollers.
over
9. Hold the backing paper edge
between the feed and pinch
rollers, and press the trigger.
10. Turn on the printer and put into load mode.
Press Load key.
Select
from the printer icon menu,
choose your supply type, and select
.
6032:
6039:
Load Supply
Calibrate
4. Turn on the printer and put into load mode.
Press Load key.
Select
from the printer icon
menu, choose your supply type, and select
.
6032:
6039:
Load Supply
Calibrate
11. Close the
cover
supply
completely.
Press ESC key to exit.
6032:
5. Close the
cover
supply
completely.
Press ESC key to exit.
6032:
Supply Holder
Supply Holder
Pinch Roller
Feed Roller
(behind
pinch roller)
Guide
Roller
(behind
supply)
1. Peel and discard the first four inches of lables from
the backing paper.
See the
or
for more information. An 18” X 24” Wall Chart
(TC603XWC) is also available. Contact your
Sales Representative for more information.
Equipment Manual
O erator's H ndbook
p
a
Read This First!
Cover
Latch
Buttons
Cover
Latch
Buttons
TC603XPEELQR Rev. AD 5/09
©2007 Avery Dennison Corp. All rights reserved.
Label Deflector
Applicator
Roller
Label Deflector
Peel Bar
2. Press the latch buttons and open
the supply cover.
1. Press the latch buttons and open
the supply cover.
3.
under
over
Feed the supplies
the applicator
roller and
the label deflector.
Applicator
Roller
Label Deflector