Ep cylinder dwell time (apt1), Blowing time (apt2), Delay time (apt3) – Avery Dennison ALS 380 User Manual
Page 73: Als 380, Peration, Pplicator, Optional
71
4.6 A
PPLICATOR
(
OPTIONAL
)
ALS
380
EP cylinder dwell time
(APT1)
– Dwell time for the EP cylinder
In the extended menu:
➔
Call up the APT1 function.
➔
Set the desired value.
– Settings are possible in 1 ms steps:
1 ... 7500 ms
➔
Confirm the setting using the ENTER key and exit
the function.
Blowing time
(APT2)
When using a blowing applicator:
– Dwell time for blowing the label on the product
In the extended menu:
➔
Call up the APT2 function.
➔
Set the desired value.
– Settings are possible in 1 ms steps:
1 ... 7500 ms
➔
Confirm the setting using the ENTER key and exit
the function.
Delay time
(APT3)
When using an EP applicator:
– Delay of the signal air blow.
The signal controls the air blow which blows the la-
bel onto the underside of the applicator. The value
for APT3 is the delay between the start of label dis-
pensing and activation of the air blow.
In the extended menu:
➔
Call up the APT3 function.
➔
Set the desired value.
– Settings are possible in 1 ms steps:
1 ... 5000 ms
➔
Confirm the setting using the ENTER key and exit
the function.