Avery Dennison ALX 924 Setup Manual - Manual

06/06 Rev. 3.05-01 OPERATING MANUAL
ALX 92x
Setup
Winding pattern ............................................. 2
Selecting the printing material ....................... 4
Thermal transfer / direct thermal printing .. 4
Label material ............................................ 4
Thermal transfer ribbon ............................. 5
Inserting label material .................................. 6
Removing spent backing paper ................. 6
Removing glue residue ............................. 6
Inserting a new label roll ........................... 7
Inserting ribbon ............................................ 11
Removing spent ribbon ............................ 11
Inserting a new ribbon roll ........................ 12
Settings ....................................................... 13
Ribbon tension ......................................... 13
Label sensor ............................................ 14
Adjustment button for printhead pressure 15
Dispensing edge ...................................... 16
Dispenser parameters ............................. 16
Material Parameters ................................ 17
Index ............................................................ 18