Avery Dennison SNAP 500 Operator Guide - Manual (Page 22)

22 Operator’s Guide—SNAP™ 500
3.2.2 Show Settings Button
Click on the “Show Settings” button.
3.2.3 Print/Cut Adjust Tab
Print Adjust allows you to move the print with relation to the cut. There is one print
adjustment for each print station. Each step is 0.003” or .076mm.
Cut Adjust will help the printer cut in the right place relative to a sense mark on pre-printed
tape. Use only with pre-printed stock.
Both of these adjustments can be made while the printer is running.