Avery Dennison 9406 Operator Handbook - Manual (Page 39)

The default setting for Monetary Sign is USA. To change the
setting, follow the steps listed under "Finding Default Options."
Then follow the steps below.
1. Press
E
. You will see the previous setting, for example
MONETARY SIGN
< USA >
2. Press
R
or
L
until you see the country for the monetary
sign you want.
3. Press E . You will see
DEFAULTS
Monetary Sign >
4. Press Q to exit to the Setup menu.
5. Press
Q
to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
Secondary Sign
If you select USA as the monetary sign, you can print amounts
less than $1.00 either by using a dollar sign and decimal ($ .30)
or by using a cent sign (30¢). Note the following facts:
•
If you set the secondary sign option to No, prices under
$1.00 will print like this: $ .45
•
If you set the secondary sign option to Yes, prices
under $1.00 will print like this: 45¢
The same option applies to monetary signs other than USA.
S
e
tti
n
g
De
fa
u
lts
6. Setting Defaults
6-3