Avery Dennison 9406 System Administrator Guide User Manual
Page 52
Advertising
8.
Using the chart below for reference, write your desired line
thickness (1-99) in box L7. Thickness is measured in dots
(1 dot = 1/192 inch).
NOTE: With white on black printing, solid black print
cannot exceed 50% coverage on any given
square inch of the supply or 30% coverage overall.
9.
Place a set of quotation marks, with nothing in the quotes,
in box L8.
10. Make sure you filled boxes L1 through L8.
11. Repeat steps 1 through 10 for each line segment.
Thickness Example
1
5
10
20
30
40
50
60
75
90
9406 System Administrator’s Guide
2-38
Advertising