Avery Dennison 9460IP Setup Guide User Manual
Page 5
5
Setting the Subnet Mask
This option sets the printer’s Subnet Mask.
1. From the Configure menu, select Subnet Mask.
Subnet Mask
255.255.000.000
E R +
Use the A buttons as shown in the following table:
E
Press A to
R
Press A to
+
Press A to
Saves the setting
Scrolls through the positions
from left to right
Increments the current
position setting by 1
2. When the setting you want is displayed, press the A button under the E
icon to save the setting. You return to the Configure menu.
Setting the Gateway
This option sets the printer’s Gateway address.
1. From the Configure menu, select Gateway.
Gateway
000.000.000.000
E R +
Use the A buttons as shown in the following table:
E
Press A to
R
Press A to
+
Press A to
Saves the setting
Scrolls through the positions
from left to right
Increments the current
position setting by 1
2. When the setting you want is displayed, press the A button under the E
icon to save the setting. You return to the Configure menu.