Avionics Innovations Speaker Amp - Manual (Page 2)

Avionics Innovations
AI-Amplifier
Installation Instructions
NOTE
FOR TECHNICAL ASSISTANCE PLEASE CALL 760-788-2602 8:00 AM TO 5:00 PM PST. ALL
REPAIRS AND RETURNS ARE PROCESSED THROUGH AVIONICS INNOVATIONS
NOTE
IF INSTALLING IN SMALL OR CONFINED SPACE, AN AVIONICS FAN IS RECOMMENDED
WARNING
THE AI-AMPLIFIER COMES IN 14 AND 28 VOLT MODELS. ENSURE THE MODEL YOU ARE
INSTALLING IS APPROPRIATE FOR THE INSTALLATION. WARRANTY WILL BE VOID IF
THE WRONG VOLTAGE IS APPLIED.
1. Select and appropriate location for the AI-Amplifier
2. Mount the AI-Amplifier utilizing (4) AN526-10-10 Screws.
3. Wire the unit per Drawing #17901-00. If installing with the AI-Shuttle Controller, refer to the
appropriate drawing listed below.
* 16900-00 for connection to 4 channel amplifier.
* 16901-00 for connection to 2 channel amplifier and 2 channel headphone out.
* 16902-00 For headphone out only.
* These drawings are provided in the AI-Shuttle Controller Installation Manual
4. Power and ground wiring should be 20 AWG minimum.
5. Audio wiring should be 22 AWG twisted shielded pair minimum.
INSTALLATION NOTES:
1. If connecting this unit to another manufactures head unit, consult the manufacturers specifications and
installation instructions pertaining to their unit.
2. It is recommended that a In Line DC Power Filter be installed with the AI-Amplifier.
POST INSTALLATION
1. Ensure unit operates according to specification.
2. Perform ground check of all installed avionics to ensure interference free operation.
3. Complete and submit the warranty registration form.