Baby Lock Endurance (Previous Model) (BND9) Instruction Book Addendum - Manual (Page 14)

12
Checking the Length of Time until the Machine’s Next
Stop
The length of time until the embroidery machine’s
next stop can be viewed in the embroidering
screen.
The machine stops when a spool change is
required, or when the machine is set to be stopped
by other settings. If the spool change indicator
appears, the machine will require a spool change.
When the time is indicated in red, this signals the
last color to be embroidered before the machine
stops.
1 Time until the machine stops
Note
● The displayed information differs from that
in Ver. 1 (described in the BND9
Instruction and Reference Guide).
Checking the Temporary Needle Bar Setting
The needle bar with the temporary needle bar
setting applied can now be viewed in the
embroidering screen.
For details on the temporary needle bar setting,
refer to page 130 in your BND9 Instruction and
Reference Guide.
1 The needle bar number changes and
appears to indicate the selected needle bar.
1
1