Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 71)

EMBROIDERING A PATTERN
264
b
Thread the machine with the embroidery
thread, lower the presser foot lever, and
then press the “Start/Stop” button to sew
the appliqué position.
→ The position of the appliqué is sewn, and then the
machine stops.
a Appliqué position
b Base fabric
c
Remove the embroidery frame from the
embroidery unit.
■ 3. Affixing the Appliqué Piece to the
Base Fabric
a
Lightly apply craft glue to the back of the
appliqué piece, and then attach it to the
base fabric within the outline of the
position sewn in step
b
of “2. Sewing the
Appliqué Position on the Base Fabric”.
b
After the appliqué piece is attached,
reattach the embroidery frame to the
machine.
Thread the machine with the embroidery thread, lower
the presser foot lever, and then press the “Start/Stop”
button to sew the appliqué.
→ The appliqué piece is sewn to the base fabric, and
then the machine stops.
Note
• Do not remove the base fabric from the
embroidery frame until all sewing is finished.
Note
• If the appliqué piece is not securely
attached to the base fabric, the appliqué
piece may lift off the base fabric during
sewing, causing misalignment.
• If the appliqué piece cannot be attached to
the base fabric with craft glue, securely
baste it in place with basting stitches.
• If thin fabric is used for the appliqué piece,
reinforce and secure it in place with an iron-
on adhesive sheet. An iron can be used to
attach the appliqué piece to the appliqué
location.
• Do not remove the fabric from the
embroidery frame when attaching the
appliqué piece to the base fabric.
Memo
• Depending on the pattern that is selected,
(appliqué piece),
(appliqué position) and (appliqué)
for all three steps may not appear. If
(appliqué) appears as a color,
embroider using thread of that color.