Babycare TENS Elle TENS - Manual (Page 14)

Display
The Opti-Max Key
This provides extra versatility to your Elle TENS+. Increasing or decreasing
the Opti-Max Key will allow you to either heighten or lessen the level of pulse
power transmitted to the electrode pads.
Pressing the Opti-Max Key either + or - will increase or decrease Opti-Max
sensation. This is extremely useful for the final stages of labour when you need
an extra surge of power. There are 5 Opti-Max levels in the BIRTH mode: 50,
100, 150, 200 and 250 Ȑs (microseconds). The unit will always start up at Opti-
Max 150 Ȑs , which is exactly half way between the highest and lowest setting.
N.B. 1. The Opti-Max Key can be used according to your preference and not
necessarily for the stage of labour you are in. 2. When operating the Opti-Max
Key the CT information will temporarily be replaced but will return automatically.
When you have finished
Press the On/Off Button to turn the unit off before removing the wires. Remove
the jack plugs from sockets holding the plugs between the forefinger and thumb.
Remove electrodes returning them to the plastic backing and pouch as supplied.
Using the Elle TENS+ in BIRTH mode
14
Press
+
Opti
Max
Useful Tips
Continue stimulation for as
long as necessary, unless
you experience discomfort.
If you stimulate for a number
of hours ensure the pads do
not become dry. If this
occurs, switch off the unit,
disconnect the electrodes,
and apply a small drop of
water to them.