BAFO BF-2003 - Manual (Page 5)

USB 2.0 to IDE 3.5” hard disk Enclosure User’s Manual 4
- - - -
.
. . .
6.1 Follow the steps below to install 3.5” hard disk.
6.2 Remove the rubber pad and release the screws, then open the USB Hard disk
enclosure (Figure 1 ~ 2)
Figure 1 Figure 2
6.3 Assemble the 3.5” hard disk with the PCB and fasten the screws. (Figure 3~ 4)
Figure 3 Figure 4
6.3 Close the hard disk enclosure (Figure 5~6)
Figure 5 Figure 6
6.4 Close the hard disk enclosure and fasten the screws.