BAFO BF-310 - Manual (Page 4)

USB to 10/100 Base-TX Ethernet adapter User’s Manual 4
- - - -
0
1 0 1 0 1 0 1 2 2 2 2
6.2.1 Turn on the power of computer and make sure the USB port is enabled
and can working properly.
6.2.2 Insert the driver of Ethernet Adapter into CD-ROM drive.
Select “Install Products - USB-10-100 Base TX Ethernet - Install”.
6.2.3 Select the “Next” to install.
6.2.4 Click on “ Finish ” to end this installation.
6.2.5 Plug in the USB to 10/100 Base-TX Ethernet Adapter into the USB port.
Windows ® will detect an USB Device. Your new hardware is installed and
ready to use.