Storage procedure – Baja Motorsports WD400-U Operator's Manual User Manual

Page 81

Advertising
background image

77

STORAGE PROCEDURE

If you do not use your ATV for a long time, it will need special service

requiring appropriate materials, equipment and skill. For this reason, we

recommend that you trust this maintenance work to your authorized service

center. If you wish to service the machine for storage yourself, follow the

general guidelines below:

VEHICLE

Place the vehicle on level ground and wash the entire vehicle.

FUEL

Drain the fuel from the fuel tank by a hand pump. Drain the fuel from the

carburetor by releasing the carburetor drain screw.

TIRES

Inflate tires to the normal pressure.

EXTERNAL

1. Spray all vinyl and rubber parts with rubber protection.
2. Spray unpainted surfaces with rust preventative.
3. Coat painted surfaces with car wax.

PROCEDURE FOR RETURNING TO SERVICE

1. Clean the entire vehicle.
2. Make sure that the vehicle is properly lubricated.
3. Perform the INSPECTION BEFORE RIDING as listed in this manual.
4. Start the vehicle as outlined in this manual.

WARNING

Draining the fuel could be hazardous.

Fuel could catch fire if you do not handle it properly.

When draining the fuel from the fuel tank, be sure to shut the engine off.

Do not smoke, and never drain fuel in an area where there are open flames

or sparks. Keep pets and children away from the fuel, and dispose of the

drained fuel properly.

Advertising