Baja Motorsports MB165 Assembly Guide - Manual (Page 2)

2
Handlebar installation
Cinch Nuts
Washers with rubber grommets 4ea.
Remove cinch nuts and washers with rubber
grommets from steering bracket.
Attatch handle bar assemly to steering bracket
by placing one washer and rubber grommet
on top of steering bracket and one washer and
rubber grommet under steering bracket (see
photos)
Torque cinch nuts to 45Nm (33ft.lbs.)
Cinch Nut
Washer and rubber grommet
on top.
Washer and rubber grommet
on bottom.
Steering bracket
Make sure allen head bolts on top handle bar
clamp are tight. Torque allen head bolts to
27Nm (20ft.lbs)
Allen head bolts
Top handle bar clamp
.
2.
3.
4.