Balanced Audio VK-6200 - Manual (Page 4)

Physical Placement
It is recommended that you provide for at least 6" of free space around the unit for proper
ventilation. High power amplifiers like VK-6200 benefit from extra ventilation around them.
Providing unobstructed air flow around the unit will assure cooler operation of its internal
components and will extend its service life.
Mount the unit on a hard surface with proper ventilation underneath.
Do not stack the VK-6200 power amplifier on top of other units, nor vice versa.
IMPORTANT NOTES :
To assure reliable operation always turn the VK-6200 OFF while making or changing
input or speaker connections. No connections should be made while the
amplifier is ON.
If the VK-6200 was turned OFF for any reason, wait at least 30 seconds before
turning it back ON.
Input Connections
Best results will be obtained when connecting the VK-6200 to a balanced preamplifier.
However, the VK-6200 is designed to accept either balanced or single-ended inputs.
Each channel of VK-6200 has two input connectors – one XLR for balanced connections, and
one RCA for use with single-ended interconnects. Input selector switch allows you to select
the right input connector for your application.
Speaker Connections
Each channel of VK-6200 is equipped with one pair of high quality binding posts. These
can accommodate a wide variety of speaker cable terminals. You can use a 7/16” wrench
to tighten these binding posts, however excessive force should be avoided to eliminate the
chance of breakage.