Baumatic BF555SE - Manual (Page 24)

2. Use a hair dryer on its lowest heat setting and lightly heat the
areas of the door seal that are not adhering correctly. The
heat will make the seal more pliable and this will allow you to
manipulate the seal into the correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT
THE LOWEST HEAT SETTING, OR HEAT THE SEAL FOR A LONG
PERIOD OF TIME. OTHERWISE DAMAGE MAY BE CAUSED TO
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE
APPLIANCE. AS YOU HAVE TILTED THE APPLIANCE
BACKWARDS, YOU MUST WAIT FOR 8 HOURS BEFORE
SWITCHING THE APPLIANCE BACK ON.
Freezer door reversal procedure (BF555SE only).
To reverse the freezer door, simply use a Phillips screwdriver to do the
following:
o
Remove the lower hinge screw.
o
The door will drop down from the upper hinge-pin socket.
o
Remove the hinge pin socket and relocate to the opposite side.
o
Remove the door catch and locate to the opposite side
o
Relocate the lower hinge to the opposite side of
the door.
o
Insert the door onto the upper hinge pin socket,
and then secure the lower hinge using the
original screw.
24