Baumatic BR100 User Manual
Page 7
Preparation
Unpacking
Remove all packaging materials.
Check attachments and materials
Please check that your appliance comes with all quoted accessories and that all
components are in good condition.
Ensure proper location of the refrigerator
Clean the refrigerator before fist use.
Ensure the appliance is located out of direct sunlight and away from other heat
producing appliances.
See also ventilation requirements (below).
Idle time
After the refrigerator has been sited and cleaned, let it stand for more than 30
minutes before connecting the power source.
Ventilation
* Level the appliance with a spirit level and a try square. The appliance has
adjustable feet.
* A minimum gap of 38mm must be maintained at the back of the appliance for
ventilation.
* Do not cover the air inlet at the front of the appliance and allow for 200cm² air
flow through plinth.
* Check the position of the power socket for usability and check the AC voltage is
compatible with the data shown on the rating plate which can be found left inside
wall of the appliance next to the salad crisper drawer(s). The power supply must
be suitably earthed.
4