BDI 8925 AVION - Manual

1
Your Avion® Home Theater Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Avion® Home Theater Furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Step 1
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Build and Install Base Assembly
First, remove all internal components from the cabinet including shelves,
hardware box and legs. Carefully lay Assembled Cabinet (F)
back-side
down. Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed
Hollow Bolts (D) from Metal Leg (H). Screw the
Metal Rail (G) to the top
of Metal Leg (H) with Hollow Bolts (D) .
Component List
Designed by BDI Design Studio.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. “Avion” and BDI are trademarks of
Becker Designed, Inc. All Rights reserved. ©2009, BDI
Made in China. 89225REV102909v2
A
v i o n
®
8925
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
D - Hollow Bolts x 4
Pre-installed on
Metal Legs (H)
A - Phillips Screwdriver
x 1
C - Hollow Bolt Wrench
x 1
F - Assembled Cabinet
x 1
E - 1/4”-20 x 2”
Machine Screw x 6
G - Metal Rail x 2
I - M4 x 25mm Screws
x 4
J - Handle x 2
K - Adjustable Shelf
x 2
M - Back Panel x 1
H - Metal Leg x 2
B - 4mm Hex Driver
x 2
H
D
G
I
Completed base assembly
Detail view of Hollow Bolts (D)
connecting the Metal Rail (G) to
the top of Metal Leg (H).
D
H
H
G
NOTE: Make sure
that the larger bolt
opening on Metal Rail
(G) faces toward the
floor.