BDI 5620 CORRIDOR - Manual

1
B - Hex Wrench
x 1
C - Leveler Wrench
x 1
Corridor is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Corridor is designed for indoor use on level floors. Clean
wood veneer with a moist cloth. Clean glass with glass
cleaner.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI Retailer.
Step 2
With the Cabinet (D) on its back, slightly loosen screw attaching metal
rail to Cabinet (D) using Hex Wrench (B). Slide tab of Metal Legs
(E,F) into metal rail and attach to cabinet by using Screw (G) and Hex
Wrench (B) until fully tightened.
Component List
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2014, BDI
Made in China. 5620REV123015v3
G - 1/4-20 x 15 mm Screw
x 12
I - M4 x 25 mm Screw
x 4
F - Metal Leg, Left
x 1
E - Metal Leg, Right
x 1
D - Cabinet
x 1
H - Door Pull
x 2
L - M6 Screw
x 4
A - Phillips Screwdriver
x 1
K - Glass Top
x 1
J - Rubber Bumper
x 1
F
E
D
G x 4
G
E
corridor
5620
bar cabinet
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]