BDI 8729-2 MARINA - Manual

1
Marina ® is engineered for easy assembly. Carefully follow this procedure
to prevent any damage.
Placement and Maintenance
Marina
® is designed for indoor use on level floors. Clean glass with glass
cleaner; steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI Retailer.
Step 2
Leveling and Shelf Adjustment
Component List
Designed by Cristian Wicha.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI is a trademarks of Becker Designed, Inc.
All Rights reserved. ©2010, BDI
Made in China. 8729-2REV12131010v6
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
For more information about the adjustable
levelers and troubleshooting, be sure to
check out “Fine tuning your new BDI Marina
Home Theater Furniture” at the end of these
instructions.
Marina
8729-2
The adjustable leveler glides on
the bottom, mid section of the
cabinet are accessible from
inside the cabinet using the Allen
Wrench (B).
The shelf pins located inside the
left and right cabinet space may
be repositioned, allowing you to
raise or lower the shelf to the
desired level.
Shelf Pin
C - Assembled Cabinet
x 1
B - Allen Wrench x 1
A - Phillips Screwdriver
x 1
E- Back Panel x 2
D - Adjustable Shelf x 2