BDI 8239 NORA - Manual

1
B - 4mm Hex Wrench
x 1
nora
8239
and
8239-S
Nora is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
NOTE: This instruction sheet is intended for the entire Nora
collection; model 8239 is shown for illustration.
Placement and Maintenance
Nora is designed for indoor use on level floors. Clean glass with
glass cleaner; steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Remove Pre-Installed Adjustable Shelves (J)
Component List
Designed by Al Glass and Matthew Weatherly.
These distinctive product configurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2011, BDI
Made in China. 8239_8239-SREV3102412v3
a S S e m b l y i n S t r u c t i o n S
bdiuSa
.
com cuStomerService
@
bdiuSa
.
com
C - Dowel Pin x 2
F - Leg Assembly
x 2
I - Assembled Cabinet
x 1
E - Center Leg x 1
D - 1/4-20 x 1.75"
Machine Screw x 2
G - Rail x 1
H - 1/4-20 x 3.25"
Machine Screw x 10
A - Phillips Screwdriver
x 1
K - Back Panel x 2
J - Adjustable Shelf
x 2
J