BDI 8137 OLA - Manual

C - 1/4-20 x 25mm
Screw x 16
D - 1/4-20 x 60mm
Screw x 2
A - 4mm Hex Driver x 1
To Attach Base Legs
B - Phillips Screwdriver x 1
To Adjust Doors
OLA
Designed by Louis A. Lara
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
OLA 8137 Rev: 06-28-11
Component List
OLA 8137 is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
Use a blanket on the floor to protect cabinet during assembly.
For missing hardware pieces, please contact BDI Customer Service at [email protected].
For all other concerns, please contact your BDI Retailer.
8137
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
OLA 8137 is designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.
E - Cabinet x 1
F - Metal Leg x 2
G - Wood Leg x 1
H - Glass Shelf x 1
I - Wood Shelf x 2
J - Back Panel x 2
I
F
E
J
J
H
I
F
C
D
G
C