BDI 9980 REVO - Manual

1
Your Revo Home Theater Furniture is engineered for easy
assembly. Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Revo Home Theater Furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and wood
veneer with a moist cloth.
Step 1
Unpack and identify the parts listed above. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Confirm that Shelf Pins (B) are pre-installed.
In order to adjust height, one must remove the glass retention clip
(secured by the shelf pin) that holds the glass shelves in place.
Loosen the 4
1. Shelf Pins (B) 1 turn with Phillips Screwdriver
(D).
Remove
2.
Retention Clips (C) ( x 4 )
Unscrew 3. Shelf Pins (B) completely.
Reposition the 4. Shelf Pins (B) at desired height
R
evo
Component List
Designed by Louis Lara.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2009, BDI
9980REV092409v8
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
9980
D - Phillips Screwdriver
x 1
E - Allen Wrench x 1
C - Retention Clip x 8
Pre-installed
A - Glass Shelf x 2
B - Shelf Pin x 8
Pre-installed
F - Grommet x 1
Retention clip (C)
Shelf pin (B)
Detail of Shelf Pin (B)
and Retention Clip
(C)