BDI 9930 totem - Manual (Page 7)

7
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
totem
9930
A9
K
J
J
Step 12
Position Universal Speaker Bracket (K) on back of speaker
and attach using appropriate mounting screws and washers
provided in Soundbar Speaker Kit (C).
NOTE: Some speakers are not equipped with
inserts to be attached to the Universal Speaker
Bracket (K) and require the purchase of an
additional bracket supplied by the speaker
manufacturer.
Step 13
Loosely pre-install Screw (A9) into Universal Speaker Bracket
(K). Locate bodies of Screw (A9) into groove of Speaker
Bracket Arms (J) and tighten into place using 5mm Allen
Wrench (A2).
NOTE: If the speaker position is either too close or
too far away from the bottom of the TV, reposition
Speaker Bracket Arms (J) to get desired spacing.
2 Person Task
Attaching Directly to Speaker
C Hardware
Speaker
K
Attaching to Manufacturer’s Bracket
Speaker
C Hardware
Manufacturer’s
Speaker Bracket
K
A9
K
TV
J