BDI 8559 VERTICA - Manual

1
Vertica is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Placement and Maintenance
Vertica is designed for indoor use on level floors.
Clean wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note
that some components are shipped inside the
cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Component List
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2014, BDI
Made in China. 8559REV012315v2
Step 2
Install and tighten Cam Bolts (D) into Side Legs (G) using Phillips
Screwdriver (A). Insert Wood Dowels (F) into corresponding holes of
Side Legs (G).
B2 - Leveler Wrench
x 1
A - Phillips Screwdriver
x 1
B1 - Hex Wrench
x 1
C - Cabinet x 1
F - Wood Dowel x 2
E - Cam Fitting x 2
D - Cam Bolt x 2
H - Base Stretcher
x 1
I - Center Leg x 1
G - Side Legs x 2
L - Adjustable Shelf
x 2
N - Back Panel
x 2
M - Large Adjustable
Shelf x 1
K - 1/4-20 x 100 mm
Machine Screw
x 6
J - 1/4-20 x 60 mm
Machine Screw
x 3
F
D
G
F
F
D
D
G
G
vertica
8559
home theater
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
TWO PERSON ASSEMBLY
J