BDI 6320 FORMAT - Manual

1
A S S E M B L Y I N S T R U C T I O N S
C - 5/32" x 12mm
Phillips Screw
x 24
E - Center Caster x 1
I - Legal File Bar x 2
J - Lateral File Bar x 1
M - Adjustable
Cabinet Shelf x 1
D - Brake Caster x 5
B - Cabinet x 1
F - M4 x 37mm
Phillips Screw
x 4
G - M4 x 25mm
Phillips Screw
x 4
H - Pull x 4
L - Adjustable
Printer Shelf x 1
K - Shelf Pin x 8
FORMAT
6320
Format is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Do not use power tools for assembly of this product.
Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Install Casters
Carefully position
Cabinet (B) on its back side so that bottom side
is accessible, then attach a
Caster at each of the six (6) exposed
installation plates using
5/32" x 12mm Phillips Screw (C) and a
Phillips Screwdriver. Then carefully turn
Cabinet (B) upright.
Component List
Designed by Matthew Weatherly.
These distinctive product confi gurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI and Format are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in Taiwan. 6320REV022312v1
A - Phillips Screwdriver
x 1
(not provided)
C x 4
E x 1
C x 20
D x 5
2 Person Task
B D I U S A . C O M C U S T O M E R S E RV I C E @ B D I U S A . C O M