BDI 1343 DINO TABLES - Manual

DINO 1343
COFFEE TABLE
DINO 1344
SMALL COFFEE TABLE
DINO 1347
END TABLE
A - Hex Wrench 4mm
x 1
C - 1/4-20 x 1/2
Flat Head Screws
4mm Socket Drive
x 3
B - 1/4-20 x 3/4
Flat Head Screws
4mm Socket Drive
x 6
G - Felt Pads x 3
H - Felt O-Rings x 3
DINO TABLES
Designed by Louis A. Lara
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1343 1344 1347 Revision: 02-23-11
Component List
DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at [email protected].
For all other concerns, please contact your BDI Retailer.
1343 1344 1347
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
D - Legs x 3
E - Shelf x 1
F - Glass x 1
F
B
D
G
C
H
E