BDI 5130 PHASE - Manual

1
Carefully follow this procedure to prevent any
damage.
Placement and Maintenance
Phase shelf is designed for indoor use on level
floors. Clean steel parts and wood veneer with a
moist cloth.
Many wood surfaces are subject to fading under
direct sunlight. BDI’s unique Graphite finish has
properties that make it more sensitive than others.
Please avoid placing BDI’s Graphite finish in direct
sunlight.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Attach Rods to Front Supports
With the holes facing up, place Front Supports (A1, A2) on soft
surface in order to prevent
damage. Hand tighten
Attachment Rods (D) to Front
Supports (A1, A2).
Component List
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2013, BDI
Made in China. 5130REV01292014v3
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
PHASE
5130
B1 - Back Support
x 1
B2 - Back Support
x 1
D - Attachment Rod
x 20
C - Wood Shelf x 5
G - Leveler x 4
F - M6 x 20mm Screw
x 20
A1 - Front Support
x 1
A2 - Front Support
x 1
E - 4mm Hex Wrench
x 1
D
A2
A2
D
D
A1
TWO PERSON ASSEMBLY