BDI 8200 Alcove - Manual (Page 9)

Install TV with attached horizontal mounting bars to
flat panel mounting brackets at desired height by
inserting the threaded studs into key holes. Note: Flanged
nuts are provided in the Plasma Mounting Blister Pack and
must be threaded on the studs of the upper mounting bar
in order to prevent any damage to the TV.
Step 6b
Step 6c
Once the threaded posts are positioned through the key holes
and slots, lower TV into resting position. Tighten flanged
nuts on upper mounting bar.
Install the second set of flanged nuts to the threaded posts of the lower
mounting bar. Once positioned, fully tighten all flanged nuts!
1 2
2 1
3
3
Assembly complete!