BDI 1441 ERAS - Manual

Eras 1441 Coffee Table
Eras 1446 End Table
B - 5mm Hex Wrench x 1
For Cam and Bolt
G - Handle
1446 x 1
F - M4 x 25mm Screws
1446 x 2
A - 4mm Hex Driver x 1
For Screws
D - 8 x 40mm Dowels x 4
A2 - Phillips
Screwdriver x 1
C1 - Cam and C2 - Cam Bolt x 4
C1
E - 1/4-20 x 63mm Screws
1441 x 8
1446 x 6
ERAS
Designed by: Noah Packard
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2012 BDI
1441 1446 Revision: 05-11-12
Component List
ERAS tables are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at [email protected].
For all other concerns, please contact your BDI Retailer.
1441 1446
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
ERAS tables are designed for indoor use on level floors. Clean wood veneer with a moist cloth.
H - Table x 1
I - Long Base Rails x 2
J - Short Base Rails x 2
K - Sliding Doors 1441 x 2
K
K
J
J
I
I
H
Please Note:
Eras 1441 Coffee Table illustration shown.
Other Eras model's components will differ in appearance.
C2