BDI 4932 Liza - Manual

Designed by Al Glass
‘Liza’ is a trademark
of Becker Designed,
Inc.
All rights reserved.
©2010 Becker
Designed, Inc.
4932 06.01.10 v1
L
i z a
4932
Your Liza Mirror can be hung vertically and horizontally. Carefully follow this procedure to prevent any damage.
Placement and Maintenance: Liza is designed for indoor use. Clean mirror with glass cleaner.
To hang your mirror at BDI’s suggested height:
• Vertical Hanging: At 66” high make two marks with a pencil, 12.5” apart. Make sure your marks are level then
install supplied hangers. Verify that hangers are level and hang mirror frame from brackets.
• Horizontal Hanging: At 68” high make two marks with a pencil, 26.5” apart. Make sure your marks are level then
install supplied hangers. Verify that hangers are level and hang mirror frame from brackets.
• The measurements shown indicate nail locations on the wall for single or multiple configurations.
h a n g i n g i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
24.75"
22.25" 26.5" 12.5" 12.75"
66" (To Floor)
12.5" 26.5"
68" (To Floor)