Draper Video Conferencing Camera Box None User Manual
Videoconferencing camera box, Please mark appropriate selections, Dimensions
by
Please Mark Appropriate Selections:
Standard Camera Box
Camera Box with optional security lock and two keys
VideoConferencing
Camera Box
Specifi cations—VideoConferencing Camera Box
VideoConferencing Camera Boxes by Draper, Inc., Spiceland, IN.
Camera box shall be a fi ve-sided formed steel enclosure with glass door front.
Five camera box enclosure panels shall be precision formed and punched
from 18 gauge cold rolled steel, with a black powdercoat fi nish. Each camera
box shall be provided with four 1¾" wire management knockouts—one each
in the side, bottom, and back panels. One cable grommet also provided
with each camera box. Front of enclosure shall feature
7
/
8
" fi nishing frame
bezel to trim opening in wall. Enclosure will mount to an opening in most
walls or panels, and be held fi rmly in position by built-in “Z Clamps.” The
VideoConferencing Camera Box may also be screwed to wall studs in any
wall thickness. Door of camera box shall be formed of tempered glass, and
hinged to allow door to fold down for service or adjustment of enclosed
components.The glass is tilted slightly forward to minimize glare. Door
protrudes 9½" into room when open. Camera box ships disassembled.
Camera Box shall have net weight of 12 lbs & shipping weight of 16 lbs.
Option: Security lock shall secure glass door and keep camera safe. Two
keys provided.
Copyright © 2004 Draper Inc. Form Vid-Conf-CameraBox_Sub04 Print ed in U.S.A.
In-Wall Mounting Box for
VideoConferencing Camera
(Camera not included)
Dimensions—VideoConferencing Camera Box
wall clamp in corner
Typical Wall
Glass
Door
GLASS DOOR INSET TYPE
MEPLA 1.00 290.117.93.0084
Bottom View
Front View
Side Elevation
knockout
4 pl 1
3
/
4
"
A
F
G
2
3
/
8
"
E
H
B
D
C
Dimensions
Dimension A (O.D.) 16
3
/
8
"
Dimension B (O.D.) 8
5
/
8
"
Dimension C (O.D.) 14
7
/
16
"
Dimension D (O.D.) 6
3
/
4
"
Dimension E (O.D.) 11"
Dimension F (I.D.) 14
5
/
16
"
Dimension G (I.D.) 6
5
/
8
"
Dimension H (I.D.) 10
7
/
8
"
Suggested Rough Opening 7" x 14
3
/
4
"
PROJECT:
ARCHITECT:
CONTRACTOR:
SUPPLIER:
DATE:
REVISED: